How to operate the screw compressor?

are the most common type of compressors used in industrial screw compressors. There are many weird ideas surrounding these rotary screw compressors. Most of these ideas have to do with the cold and winter. Simple maintenance can solve many problems and failures, with winter weather.

Many people think that because their compressor is in a heated building, it will not be affected by outside temperatures. This is not truebecause the oil coolers are often vented outside the building. Oil in a bag of exposure to cold air can be thick and non-circular trap. Some screw compressors have bypass valves in the cooling or heating oil. This protects the components of the compressor during startup in cold weather.

The valve should be checked regularly to ensure proper operation. Synthetic oil can be a good help, because it transmits more easily at lowTemperatures. However, the problem of water was set up in oil pan, because the water boils off and does not evaporate when the compressor occasionally below 140 degrees F. problems caused by the water structure of working groups to discharge a small amount of oil as possible to avoid the cold before starting the compressor.

The cold causes condensation to build sometimes in the air lines of screw compressors. This can cause the sensors to send false signals to theScrew compressors control computer systems. This is the compressor with a full load to run someone notices the constant elimination of valves. The condensation is through the sewage system, which removes in a strategic position in the air system.

of waste that are usually taken in a drain outside the building. In cold weather, these lines clogged with ice, the forces of condensation in the air system. If not drained properly beforeThe compressor is off, this can damage some parts of the compressor and expensive components.

E 'customary for companies in its screw compressors out of service during the winter months. This is only good if the right steps are taken to winterize the screw compressors. These include oil and filter change.

oil products is an acid that the motor bearings and can damage the compressor. Manual turning of the engine and keep the rotors oiledAlso an important food should be avoided at the outset. Proper maintenance of screw compressors is important to avoid costly service calls and minimize downtime.